THERMASGARD® HFTM-wModbus LCD

Calibratable sleeve temperature transmitter THERMASGARD® HFTM - Modbus - T3, with Modbus connection, in impact-resistant plastic housing with quick-locking screws, cable sensor with stainless steel sleeve, optionally with ⁄ without display, measures temperature (-50...+150 °C). International system of units SI (default) is set to Imperial (via Modbus).

The sleeve sensor is used to measure the temperature in liquid and gaseous media. It can be used as a duct sensor or installed in an immersion sleeve THE (accessory) as an immersion and screw-in sensor in liquids.

Innovative Modbus sensor with galvanically isolated RS485 Modbus interface, switchable bus terminating resistor, DIP switch for setting the bus parameters and bus address in de-energized state, internal LEDs for telegram status display, two separate push-in terminals and large three-line display (illuminated, individually programmable in the 7-segment range and dot matrix range). By means of self-diagnostics sensor break or sensor short circuit are recognized as errors. The error messages can be called up via the Modbus and are shown on the display. The sensor is calibrated at the factory; fine adjustment by a specialist is possible depending on the environment.